Integrated Well Abandonment Services

The BETTIS Multiport Flow Selector (MPFS) provides a cost effective and compact means to improve production management and well optimization. To decrease the costs associated with weight, space and installation time, operators are looking for smaller, more integrated equipment that can do the same or more by requiring less space and cost.


We have a solution – Emerson Compact Test Manifold, using MPFS. The MPFS allows the selecting and diverting of well fluids from an individual well to a single test outlet, flow loop or sampling device.The MPFS can also be used for water injection for Enhanced Oil Recovery (EOR) projects. It provides control simplicity in an environment where size, weight and reliability are all key factors. Connecting up to seven flow lines, the MPFS allows the combined fluids to flow through a separate group outlet, while simultaneously isolating any single well for testing. In existing design (conventional well test manifold), for seven lines we will have to use 14 valves (2 valves / line) for testing and in the Emerson Compact test manifold, these 14 valves are replaced with a single BETTIS Multiport Flow Selector.

Please contact the AOS Orwell Sales and Engineering Team for designing and selecting the best suitable solution for your requirement.MPFS valve Body consists of 8 inlet ports, 1 test outlet and common group outlet. Out of these 8 inlet ports normally 7 ports are connected to well inlets and 1 is used as parking slot / maintenance slot. Bonnet will hold the plug vertically and balanced to rotate within the body and provides tight sealing to the valve body. Valve is available in wide variety material which can be used in any severe operating condition. Rotor – High Differential Seal Assembly and online seal adjustment capability gives best isolationof wells (Avoid leakage) & provides hassle free online maintenance. This MPFS is operated using an Electric Actuator {EIM} which will work any of communication protocol such as Modbus RTU RS485 & Modbus TCP/IP, Foundation Fieldbus H1 (FF certified), Profibus DP with Redcom (certified), DeviceNet (ODVA certified). Using robust EIM actuator we can attain the plug position with an accuracy of +/- 1 degree. Actuator has 12-bit magnetic encoder coupled directly to valve stem for position feedback. High performance microcontroller updates motor control output every 1mS for precision motor control. There is a 12-bit magnetic encoder also in the actuator which is coupled directly to torque pinion for torque feedback. Actuator has local display which shows error signals and facilitate manual local operation.

Because of all these above peculiar benefits MPFS – the latest concept in Production Test Manifold design and are the preferred choice since they are significantly more economical and more compact than conventional designs.

Newsletter Sign-up